







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Paradise Homeowners Choose KraftMaid Construction
Penhallow Remodeling Paradise provides independent KraftMaid construction and service in Paradise, Nevada, including cabinet installation, refacing, and full kitchen remodeling using KraftMaid cabinetry. What sets our KraftMaid work apart is hands-on familiarity with how the brand behaves in desert conditions: we know which door styles warp first in low humidity, why Vantage drawer boxes sag, and which hinge failures are pattern rather than accident. We’re an independent KraftMaid service provider, not an authorized dealer or affiliate of the manufacturer. Call (844) 761-9837 for a free estimate with a written price before any work starts.
Why Trust Penhallow Remodeling Paradise for Your KraftMaid Construction?

Our technicians have up to 22 years of experience, and a good share of that has been spent inside KraftMaid boxes, not just around them. We’ve installed KraftMaid lines across the Las Vegas Valley long enough to recognize the brand’s specific tells: the hinge plate that starts pulling from particleboard after a few dry summers, the drawer bottom that sags under a stack of cast iron, the painted finish that lifts at the edge of a Chatham door facing a west window.
That matters when parts come into play. We source OEM-compatible KraftMaid hinges, drawer glides, and touch-up finishes whenever they’re available, because the right part preserves both fit and warranty coverage. When a budget-conscious repair calls for quality aftermarket soft-close hardware, we say so plainly and explain what you trade. Service is done warranty-safe: we don’t drill, cut, or finish in ways that give a manufacturer a reason to deny a claim.
Every technician who walks into your Paradise home is background-checked and arrives in uniform. You’ll have a written price before we touch a cabinet, and the 365-Day Done Right Promise covers the work in writing. If something fails inside the guarantee period, we come back and fix it at no charge. That’s the standard behind every KraftMaid job we take on in Paradise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Paradise
KraftMaid builds a solid cabinet, and most of what we repair isn’t a manufacturing defect. It’s a product of climate and time. Here’s what we see most often in Paradise kitchens:
- Door warping and delamination in low humidity. Paradise’s desert air pulls moisture from wood and composite door cores. Painted and thermofoil finishes, especially on Chatham and Weatherly doors, are the first to show it: edges lift, panels cup, and a door that closed flush in March sits proud by September. Replacing the door or re-securing the skin is usually the fix, not a new run of cabinets.
- Drawer box joint separation and bottom sagging in older Vantage cabinets. Vantage series boxes take a beating when loaded with heavy cookware, and the joints loosen over years of daily pulling. The bottom panel bows and the drawer starts dragging. Reinforcing the joint and replacing the bottom restores the box without replacing the cabinet.
- Soft-close hinge failure and misalignment. Soft-close mechanisms have a limited duty cycle, and a busy Paradise kitchen cycles them hard. When a hinge fails, the door sags and rubs the frame. Swapping the hinge and re-aligning the door takes minutes; ignoring it wears the frame.
- Finish fading and yellowing on stained maple or cherry. Intense Nevada sun through west- and south-facing windows bleaches stain and yellows clear coats over time. Touch-up finishes match the original color, and we’ll flag where a window treatment would stop it happening again.
- Hinge screw pull-out from the particleboard box. This is the most common KraftMaid repair we run in Paradise. The screws loosen in the box material and the door drops. We reinforce the holes with wood glue and dowels, then reset the hinge, which is a fraction of the cost of a new cabinet.
KraftMaid Parts & Our Repair-vs-Replace Approach

We don’t keep KraftMaid inventory on hand. Parts are sourced per job, which means we’re not pushing whatever’s sitting in a bin. OEM KraftMaid hinges, glides, and touch-up finishes are the first call when they’re available, because the fit is right and the warranty stays intact. When OEM hardware is back-ordered or the budget is tight, we’ll quote quality aftermarket soft-close units and explain the difference before you decide.
The repair-or-replace question gets an honest answer. If the cabinet box is structurally sound and the problem is hinges, glides, or finish, refacing or rehinging is often the smarter spend. If there’s water damage or the particleboard has swelled, replacement is the only repair that lasts, and we’ll tell you that even when it means a smaller job for us. Call (844) 761-9837 and we’ll look at it and give you a written price either way.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open every door and drawer in the run, check hinge plates for pull-out, test glide action, and look for finish lift at door edges. The written price you get reflects what we actually find, not an average.
- 2
Repair or install. OEM-compatible KraftMaid parts go in where they fit best, aftermarket soft-close where the budget calls for it. Screw holes get reinforced with wood glue and dowels before hinges are reset. New KraftMaid installs are set level and plumb, with reveals checked door by door.
- 3
Test. Every drawer gets loaded and cycled. Every door gets opened and closed to confirm soft-close engages and alignment holds. We don’t call a job finished until the run operates the way it did when new.
- 4
Warranty. You get a written guarantee on the work, backed by the 365-Day Done Right Promise. If a hinge we replaced fails or a door we set goes out of alignment inside the year, we come back and fix it at no charge.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Paradise
We service and install across the KraftMaid lines Paradise homeowners actually own and buy. That includes the Vantage series and its older drawer box construction, the Momentum series, and door styles like Chatham and Weatherly where finish failure tends to show first. On the install side, we handle new KraftMaid cabinet runs, refacing over sound existing boxes, and full kitchen design and layout work built around KraftMaid’s dimensional options. If you’re planning a Paradise kitchen remodel, we’ll lay out the cabinetry plan and quote it in writing before any box is ordered. Cabinet installation in Paradise typically runs $4,000 – $13,000 depending on run length and door style.
We Also Service These Brands
KraftMaid is one focus, not the only one. We also work with Kohler and Toto fixtures, Cambria and Silestone countertops, and a range of other recognized trade brands. That matters in a Paradise kitchen where the cabinet repair turns into a countertop swap, or the refacing job uncovers a faucet that should have been replaced two years ago. One company, one written price, one guarantee covering the whole scope.
FAQs – KraftMaid Construction Service in Paradise

No. We’re an independent KraftMaid service provider, not an authorized dealer or affiliate of the manufacturer. We install and service KraftMaid cabinetry because we know the product lines well, not because KraftMaid endorses us. Any warranty coverage on KraftMaid products comes from KraftMaid itself; our guarantee covers our labor and workmanship. Call (844) 761-9837 for a free written estimate.
Yes, whenever they’re available. We source OEM KraftMaid hinges, drawer glides, and touch-up finishes per job so fit and warranty coverage stay intact. If an OEM part is back-ordered or the budget points elsewhere, we’ll quote quality aftermarket soft-close hardware and explain the trade-off before you decide.
Most hinge and glide repairs are a single visit. A refacing job typically takes two to four days, and a full KraftMaid cabinet install runs one to three weeks depending on run length and countertop scheduling. You’ll get a defined timeline in writing with your price. Call (844) 761-9837 to schedule your free estimate.
We service and install the KraftMaid Vantage and Momentum series, along with door styles including Chatham and Weatherly. Older Vantage boxes with the original drawer construction get specific attention because those are the ones most likely to need joint reinforcement. If you’re not sure which line you have, we’ll identify it during the estimate.
Not when it’s done correctly. We work warranty-safe: OEM-compatible parts where they fit, no drilling or cutting that gives a manufacturer grounds to deny a claim, and no finish work that alters the original surface beyond touch-up. Our labor carries its own written guarantee on top of whatever KraftMaid covers.
It depends on scope. Cabinet installation in Paradise runs $4,000 – $13,000, countertop installation $2,000 – $6,500, backsplash work $800 – $2,500, and kitchen island installation $3,000 – $10,000. Hinge and glide repairs cost far less. Call (844) 761-9837 for an exact quote – estimates are free and the price is written before work starts.
In most cases, yes. We source OEM KraftMaid touch-up finishes per job, and for stained maple or cherry doors we match the current color rather than the original, since Nevada sun shifts both over time. If a finish has faded too far to match cleanly, we’ll tell you before you order the door.
Usually a worn glide or a drawer box that’s out of square from years of heavy loads. On older Vantage boxes, the joint separation lets the bottom sag, which throws off the glide alignment and stops the soft-close from engaging. We replace the glide, reinforce the box, and test the drawer loaded before we call it done. Call (844) 761-9837 for a free estimate.
They hold up well, but dry heat is real. Paradise’s low humidity pulls moisture from door cores, and painted or thermofoil finishes on Chatham and Weatherly doors are the most likely to lift or cup over time. Stable indoor humidity and window treatments on west-facing exposures go a long way. When a door does warp, replacement is usually the fix, not a new cabinet run.
Often, yes. If the boxes are solid and the problem is finish, hinges, or glides, refacing or rehinging costs a fraction of replacement. If there’s water damage or the particleboard has swelled, replacement is the honest call and we’ll say so. Call (844) 761-9837 and we’ll look at the boxes and give you a written price on both paths.
Yes, and it’s one of the most common Paradise kitchen jobs we quote. We measure the existing footprint, check for level and plumb at the walls, and design the new KraftMaid run around what’s actually there. Cabinet installation in Paradise typically lands between $4,000 and $13,000 depending on run length and door style. Call (844) 761-9837 to schedule your free estimate.
Book Your KraftMaid Service in Paradise, NV
Whether it’s a hinge that finally gave out or a full KraftMaid kitchen install, you’ll get a written price before any work starts and a written guarantee behind it. Our technicians have up to 22 years of experience, and someone answers the phone 24/7. Call (844) 761-9837 to schedule your free estimate in Paradise.
Written by the team at Penhallow Remodeling Paradise.












